HCH 40
The Chip-Free Alternative for Small Diameters
The BEWO HCH-40 can be supplied on the basis of either an ECH line, and a DCH line. Either as a single or double chop line. In the first case as a single chop line, in the second case as a double chop line. The chop unit has been developed for diameters between 10 and 40 mm.
Dual servo-controlled feed rollers
Punch and mould in cassette system

The BEWO HCH-40 can be supplied on the basis of either an ECH-line, and a DCH-line. Either as a single or double chop line. In the first case as a single chop line, in the second case as a double chop line. The chop unit has been developed for diameters between 10 and 40 mm.

Uninterrupted Chopping Process

A servo-controlled drive system ensures a continuous supply of round pipe, in both steel and aluminum. Because the tubes are guided automatically at several places while being transported, this brings about an uninterrupted chopping process. The punch molds have been installed in a cassette system, which makes it possible to switch tube diameters quickly. The uniquely shaped chopping blade limits any distortion of the tubes to a minimum and need not be changed when switching to another material.

Our website is protected by DMC Firewall!